自适应SA-PSO优化的威布尔混合分布参数估计方法及应用

针对采用传统参数估计方法得到的模型拟合误差较大的问题，建立多重威布尔混合分布参数估计的非线性最小二乘模型，并提出基于模拟退火（SA）思想的自适应粒子群（PSO）算法进行求解。在PSO算法优化过程中，采用自适应方法调整惯性权重和加速因子，加快其收敛速度；引入模拟退火机制，根据Metropolis准则确定最优粒子的取舍，改善其全局搜索能力。将该方法应用到某型柴油机喷油器失效分布的参数估计中，并与图解法、基于Levenberg-Marquardt的非线性最小二乘法、标准PSO算法、自适应PSO算法求解的结果进行比较，分析所提方法的优化性能及精度。结果表明，该方法能够有效提高多重威布尔混合分布模型参数估计的精度和效率。     

云边协同助力行业数字化转型

随着边缘计算的快速发展,边缘计算在各行业中的应用也越来越广泛.分析了云边协同在典型场景下的应用需求和业务模式,对云边协同在不同行业场景下的重要作用进行了介绍,最后给出了云边协同未来的发展趋势.     

基于线特征及迭代最近点算法的地基建筑物点云自动配准方法

为克服迭代最近点(ICP)算法易陷入局部最优的缺陷，提出一种基于线特征及ICP算法的地基建筑物点云自动配准方法。首先，基于法向一致性进行建筑物点云平面分割；接着，采用alpha-shape算法进行点簇轮廓线提取，并拆分和拟合处理得到特征线段；然后，以线对作为配准基元，以线对夹角和距离作为相似性测度进行同名特征匹配，实现建筑物点云的粗配准；最后，以粗配准结果为初值，进一步采用ICP算法完成点云精确配准。利用两组部分重叠的建筑物点云进行配准实验，实验结果表明，采用由粗到精的配准方法能有效改善ICP算法对初值依赖的问题，实现具有部分重叠的建筑物点云的有效配准。     

Estimation of Antenna Correlation Coefficient of N-Port Lossy MIMO Array

This paper proposes a simple yet accurate method for estimating the antenna correlation coefficient (ACC) of a high-order multiple-input multiple-output (MIMO) antenna. The conventional method employed to obtain the ACC from three-dimensional radiation patterns is costly and difficult to measure. An alternate method is to use the S-parameters, which can be easily measured using a network analyzer. However, this method assumes that the antennas are highly efficient, and it is therefore not suitable for lossy MIMO antenna arrays. To overcome this limitation, we define and utilize the non-coupled radiation efficiency in the S-parameter-based ACC formula. The accuracy of the proposed method is verified by the simulation results of a 4-port highly coupled lossy MIMO array. Further, the proposed method can be applied to N-port arrays by expanding the calculation matrix.     

Maximum likelihood-based adaptive differential evolution identification algorithm for multivariable systems in the state-space form

Parameter estimation plays an important role in the field of system control. This article is concerned with the parameter estimation methods for multivariable systems in the state-space form. For the sake of solving the identification complexity caused by a large number of parameters in multivariable systems, we decompose the original multivariable system into some subsystems containing fewer parameters and study identification algorithms to estimate the parameters of each subsystem. By taking the maximum likelihood criterion function as the fitness function of the differential evolution algorithm, we present a maximum likelihood-based differential evolution (ML-DE) algorithm for parameter estimation. To improve the parameter estimation accuracy, we introduce the adaptive mutation factor and the adaptive crossover factor into the ML-DE algorithm and propose a maximum likelihood-based adaptive differential evolution algorithm. The simulation study indicates the efficiency of the proposed algorithms.     

单相并联型有源电力滤波器主电路参数耦合关系研究

单相并联型有源电力滤波器(SAPF)主电路参数之间存在一定的耦合关系,这对各参数值的合理选择有较大的影响。通过分析现有单/三相SAPF主电路交流侧电感以及直流侧电压、电容值等参数的计算方法,得到了具体的单相SAPF电路参数解析表达式。针对所得表达式各变量之间的耦合关系,在MATLAB中进行建模优化分析,得出一套完整的参数设计方案。保证在特定负载下补偿后谐波含量低于2%的综合优化目标。仿真和实验过程验证了所选参数的正确性。     

气候环境实验室地面结冰云雾模拟控制系统设计

飞机结冰会引起飞机气动特性、动力系统性能改变,甚至造成飞行事故。地面结冰云雾模拟设施作为一种模拟飞机飞行结冰条件的重要设备,常用于飞机防除冰系统功能验证。针对气候环境实验室结冰云雾试验条件需要,在对地面结冰云雾模拟系统进行研究的基础上,对适用于气候环境实验室的结冰云雾模拟系统进行了设计。对系统关键设计技术、系统功能及组成进行了分析,并对控制系统方案进行了详细阐述。试验表明,控制系统人机界面友好,运行可靠,能够满足液态水含量、雾滴直径参数的精确调节,产生符合试验所需的结冰环境。     

Structural parameter design method for a fast-steering mirror based on a closed-loop bandwidth

When a fast-steering mirror (FSM) system is designed, satisfying the performance requirements before fabrication and assembly is vital. This study proposes a structural parameter design approach for an FSM system based on the quantitative analysis of the required closed-loop bandwidth. First, the open-loop transfer function of the FSM system is derived. In accordance with the transfer function, the notch filter and proportional-integral (PI) feedback controller are designed as a closed-loop controller. The gains of the PI controller are determined by maximizing the closed-loop bandwidth while ensuring the robustness of the system. Then, the two unknown variables of rotational radius and stiffness in the open-loop transfer function are optimized, considering the bandwidth as a constraint condition. Finally, the structural parameters of the stage are determined on the basis of the optimized results of rotational radius and stiffness. Simulations are conducted to verify the theoretical analysis. A prototype of the FSM system is fabricated, and corresponding experimental tests are conducted. Experimental results indicate that the bandwidth of the proposed FSM system is 117.6 Hz, which satisfies the minimum bandwidth requirement of 100 Hz.     

基于多项式变换的参数估计方法

本文给出一种采用DPT估计SNCK信号时宽—带宽积的方法,并通过仿真该估计方法的性能与其它估计方法进行比较.首先给出SNCK信号参数估计的一般过程.为了便于计算和理论推导,根据估计出的中心频率将接收到的SNCK信号搬移到零频,从而进一步估计其它参数,如采用DPT估计SNCK信号时宽带宽积.本文将重点研究采用DPT算法估计SNCK信号值的方法.